Additional Log Information:
smartCARS version 2.1.35.0, 2022-7-7 UTC
[20:05:36] Preflight started, flying offline
[20:05:36] Flying PMDG 737-86NBCF NGXu Mirage VA N738MC (Fictional)
[20:09:11] Pushing back with 25029 lb of fuel
[20:10:15] Engine 2 is on
[20:10:59] Engine 1 is on
[20:11:39] Flaps set to position 2
[20:11:49] Taxiing to runway
[20:12:00] Flaps set to position 3
[20:14:23] Taking off
[20:14:51] Climbing, pitch: 10, roll: level, 157 kts
[20:14:55] Gear lever raised at 97 ft at 174 kts
[20:15:59] Flaps set to position 4 at 3043 ft at 202 kts
[20:16:01] Flaps set to position 2 at 3096 ft at 205 kts
[20:16:09] Flaps set to position 1 at 3225 ft at 216 kts
[20:16:17] Flaps set to position 0 at 3359 ft at 227 kts
[20:37:15] Cruising at 34000ft, pitch: 2, 452 kts
[22:23:13] Sim paused
[23:09:51] Sim unpaused
[23:11:23] Descending
[23:26:12] Approaching
[23:33:17] Flaps set to position 2 at 3151 ft at 213 kts
[23:34:13] Final approach, 198 kts
[23:34:32] Gear lever lowered at 2666 ft at 189 kts
[23:34:32] Gear lever raised at 2664 ft at 189 kts
[23:34:32] Gear lever lowered at 2652 ft at 189 kts
[23:34:45] Flaps set to position 3 at 2435 ft at 185 kts
[23:34:55] Flaps set to position 4 at 2278 ft at 181 kts
[23:35:10] Flaps set to position 5 at 2053 ft at 172 kts
[23:35:19] Flaps set to position 6 at 1914 ft at 166 kts
[23:35:30] Flaps set to position 8 at 1762 ft at 160 kts
[23:37:56] Touched down at -159 fpm, gear lever: down, pitch: 7, roll: level, 118 kts
[23:37:58] Aircraft bounced, touched back down at -20 fpm
[23:38:31] Landed in 4724 ft, fuel: 7870 lb, weight: 146170 lb
[23:38:31] Taxiing to gate
[23:38:43] Flaps set to position 0
[23:38:54] Flaps set to position 6
[23:39:00] Flaps set to position 4
[23:39:07] Flaps set to position 2
[23:39:18] Flaps set to position 0
[23:41:25] The flight may now be ended
[23:41:25] Arrived, flight duration: 02:36
[23:41:36] Engine 1 is off
[23:41:36] Engine 2 is off
Comments
Commenter |
Comment |
Jerry Hayman |
Man your landings are so much better than mine. Nice work :) |