Flight MEC1000

  • Submitted By: Dave Anderson
  • Departure Airport: Sarasota Bradenton International Airport (KSRQ)
  • Arrival Airport: Daytona Beach International Airport (KDAB)
  • Aircraft: KING AIR C90 (N119MC)
  • Flight Time: 01.33
  • Date Submitted: 12/30/2016
  • Status: Accepted
Flight Details
Gross Revenue:
(4 load / $ 526.67 per unit
$ 2, 106.68
Fuel Cost:
(611 fuel used @ 1.77 / unit)
$ 1, 081.47

Additional Log Information:

smartCARS version 2.1.26.2, 2016/12/30 UTC
[23:33:37] Preflight started, flying offline
[23:33:37] Flying Alabeo C441 Conquest II D-IACA
[23:33:38] Sim paused
[23:33:38] Engine 1 is on
[23:33:38] Engine 2 is on
[23:33:44] Sim unpaused
[23:35:46] Pushing back with 3212 lb of fuel
[23:41:25] Taxiing to runway
[23:42:14] Flaps set to position 1
[23:45:31] Taking off
[23:45:42] Climbing, pitch: 15, roll: 1 degrees left, 99 kts
[23:45:47] Gear lever raised at 114 ft at 109 kts
[23:45:53] Flaps set to position 0 at 253 ft at 116 kts
[00:03:05] Overspeed entered
[00:03:54] Overspeed left after a max speed of 202 kts
[00:58:18] Sim paused
[00:58:46] Sim unpaused
[01:12:23] Flaps set to position 1 at 1481 ft at 128 kts
[01:14:26] Gear lever lowered at 1601 ft at 139 kts
[01:16:54] Flaps set to position 2 at 1222 ft at 125 kts
[01:17:37] Flaps set to position 3 at 652 ft at 100 kts
[01:18:56] Touched down early at -160 fpm, gear level: down, flaps: 3
[01:18:56] On the ground 226 nm from the planned arrival airfield
[01:19:13] Landed in 1814 ft, fuel: 2607 lb, weight: 8787 lb
[01:19:13] Taxiing to gate
[01:19:18] Flaps set to position 0
[01:21:18] Flaps set to position 1
[01:22:07] Flaps set to position 0
[01:22:23] The flight may now be ended
[01:22:23] Arrived, flight duration: 01:33
[01:22:46] Engine 1 is off
[01:22:46] Engine 2 is off
[01:23:48] Sim paused

Comments

Commenter Comment
Dave Anderson I flew using ATC in FSX for MEC1000 KSRQ to KDBA. I don't know why they sent me off course. I checked my flight files and they were to the assigned airports? I did reinstall the SmartCar software just before this flight. Could that have something to do with the problem?
Dave Anderson One must be careful what code you use for the airports.

Route Map